RAP-C Recycled material crushing

RAP-C Roller Crushing equipment is a brand new special crushing and screening product based on the design of the experience of the recycled asphalt hot mix plant, combined with the special characteristics of the RAP-C material acquisition method.

Model Capacity: 60-80TPH or 120-150TPH

Primary crushing: Feed size< 800mm

Secondary crushing: Feed size<150mm

Discharging type: generally 2 or 3 types

Send Email

Chat Now

Share With:

Introduction

RAP-C Recycled material crushing

Roller primary crusher

The spiral crushing roller and the hydraulic pushing device act at the same time to effectively crush large RAP-C materials;
Standard crushing head, good wear resistance, easy to replace;
The spring tensioner after the crushing shaft prevents instantaneous equipment failure caused by oversized pieces of RAP-C material.

Double-roll secondary crusher

Double-roll secondary crusher, floating crushing roller, can not only adjust the discharge particle size, but also effectively protect the instantaneous equipment failure caused by oversized RAP-C materials;
The staggered arrangement of highly wear-resistant toothed plates can effectively crush over-sizedRAP-C materials.

Get Price Quote

+86-18838114766

Product advantages

Main Advantages of RAP-C Recycled material crushing

The single-roller crusher uses a guard plate made of wear-resistant materials to protect the standard cutter head, which has strong crushing ability, good wear resistance, easy replacement, and improves the service life of the equipment;

Floating double-roll crushing can effectively prevent instantaneous equipment failure caused by large RAP-C materials;

The staggered arrangement of wear-resistant tooth plates can effectively crush RAP-C materials without sticking to the material;

The high-frequency vibrating mesh screen combined with anti-plugging technology effectively solves the problem of fine material adhering to the mesh screen.

Technical Parameters

Technical Parameters of RAP-C Recycled material crushing

Model	RAP-C 80	RAP-C 150
Capacity	60-80TPH (Finished material<30mm)	120-150TPH (Finished material<30mm)
Primary crushing	Feed size< 800mm Single roll tooth crushing, standard cutter head can be replaced Flexible crushing without destroying the original gradation
Secondary crushing	Feed size<150mm Double stick staggered arrangement, non-sticky RAP-C material Floating crushing rollers for easy adjustment of the discharge size
Discharging type	Available according to customer requirements (generally 2 or 3 types)
Vibrating screen	Driven by double vibration motor Special anti-clogging screen

Components Features

Components Features of RAP-C Recycled material crushing

Cold feeding bin

Split cold feeding bin, to ensure effective volume, easy to transport;
The upper part of the cold bin is equipped with a grid, which is driven by a maintenance-free vibration motor to remove over-sized materials and prevent material blockage;
The special bin structure can effectively prevent the material from arching.

Get Price Quote

Vibrating screen

Linear screen driven by double vibrating motors, maintenance-free design. The front and rear tension of the screen is convenient for maintenance and replacement;
The high-frequency vibrating mesh screen combined with anti-plugging technology effectively solves the problem of fine material adhering to the mesh screen.

Get Price Quote

ONLINE SERVICE

Your Satisfaction Is
Our Success

If you are looking for related products or have any other question, please feel free to contact us.

You can also give us a message below, We will contact you within 6 hours.

+86 18838114766